Tensiol LT/B
TENSIOL LT/B is a specific product for the cleaning of metallic nets of the vacuum leather drying systems.
It is well known that a coarsy and infrequent maintenance of such important components can cause serious inconveniences such as:
- accumulation of dangerous patina constituted by dyestuffs and and badly mixed fatliquors;
- obstruction of the nets caused by dust and skin fragments deposit.
The most serious and frequent consequences are:
- accumulation of indelible stains on dried leathers (in particular if clear or pastel-coloured);
- bad performance of the plant with a consequent overload of the system of pumping in vain;
- a high energy use and the achievement of badly dried skins.
Usage
TENSIOL LT/B can be used in two different ways:
- total and complete cleaning of the nets: you have to disassemble the nets of the sucking hood and to treat them with a solution 10÷12% of TENSIOL LT/B, atomized and sprayed at high pressure by water-cleaner;
- maintenance cleaning: between the drying of a dark leather lot and a clear one atomizing the washing solution and rinsing with hot water or pouring using a quantity of TENSIOL LT/B enough to cover all the metallic support plain of the grain and activating for a short period the pumping system in vain in order to wet completely the nets. Switch off the machine, during the night the washing solution emulsifies completely the accumulated grea-se. In the morning carry out an energic rinsing, spraying hot water at high pressure.
Feltor FR
Este producto específico está indicado para el tratamiento y el reacondicionamiento de los sistemas de transporte especiales presentes en los fieltros para un planchado de acabado de rodillos y de estampación.
Es bien sabido que estos sistemas de transporte caros e importantes , están hechos de una composición particular de lana y de fibras sintéticas , sometidas a tratamiento térmico - mecánico diferente que tiene el propósito de facilitar una superficie uniforme . Este muy importante de nivelación puede verse afectada por el paso de pieles semirifinite no completamente extendida . Este inconveniente hace que de depresiones severas en los fieltros, que ponen en peligro el uniforme de cuero estampado posterior.
El FELTOR FR , con su acción suavizante , tiene precisamente el objetivo de reverdecimiento y el oleaje del fieltro con el fin de nivelar perfectamente.
Por tanto, su acción está dirigida a la consecución de dos objetivos importantes :
- Reduzca la velocidad del proceso de desgaste de los fieltros , manteniendo su suavidad original y elasticidad de la lana componente;
- Para ayudar a restaurar las depresiones acumulados durante el sellado de los productos son perfectamente no mentir o espesor variable , los problemas típicos de las personas que trabajan terceros.
Como utilizar:
Se recomienda lavar por lo menos una vez a la semana , por disolución en agua caliente en la FELTOR FR proporción 02:10 .
Moje el transportador sentido con esta solución mediante un spray manual. Pare la máquina . Durante la noche la ruptura ( o fin de semana durante el invierno ) el fieltro se seca poco a poco.
Se encontró , además, que una solución de 01:05 de FELTOR FR también mantener un grado uniforme de nivelación de la superficie del fieltro para el prensado de las pieles azules húmedas y en retorsa después de la tintura y engorde .
En esta fase del trabajo , se sugiere también para desengrasar con FELTOR PF o FELTOR PFS para obtener una acción de ablandamiento más eficaz de la FR FELTOR final.
Feltor PF
Specifically formulated for the degreasing and cleaning of the felts used in tanning.
Its concentration in active materials is 40% with more than 90% of biodegradability.
While carrying out the pressing action, the felt absorbs through the humidity that comes out of the skins a lot of impurities. These are particularly evident on the sides of the felt in the form of a deposit.
The product, thanks to its particular characteristics, manages to remove completely this unwanted residue, keeping at the same time the felt in optimum condition. The wash carried out regularly with this degreaser allows you to make thefelt last longer.
Usage
Feltor PF can be used both diluited 1÷5 or concentrated, depending on the type of the plant.
Features
· Combination of anionic and non-ionic agents
· Achromic liquid = 40%
· pH (solution 10%) = 5,5÷6
· More that 90% of biodegradability
Feltor PFS
It has the same characteristics of the Feltor PF with an extra important advantage for the reconditioning of the felt.
Its concentration in active materials is 100% with more than 90% of biodegradability.
Using this product, that is a strengthened detergent, all the residue is deeply and completely removed, which often cannot be eliminated with the normal detergent for felts, and furthermore the textile fibres that make up the felt are protected.
As a consequence, even energetic and frequent treatments do not damage the felt in its function of soaking and relieving.
Usage
Feltor PFS can be used both diluited or concentrated, depending on the type of the plant.
Features
· Combination of anionic and non-ionic agents
· Achromic liquid = 100%
· pH (solution 10%) = 5,5÷6
· Fully compatible with anionic and non-ionic agents
· More that 90% of biodegradability